Tilt/Trim Repair Part

Tilt/Trim Repair Part

Tilt/Trim Repair Part

Tilt/Trim Repair Part

(1)

Tilt/Trim Repair Part

Tilt/Trim Repair Part

SWITCH

12 Volt, Reversible
Field Hsg OD: 75.4mm / 2.969in
Overall Length: 130.1mm / 5.122in
Shaft OD: 7.2mm / 0.283in

12 volts, Reversible,
2-Wire Configuration
Application: Volvo Penta Marine Applications

(3)

12 volts, Rotation: Reversible,
3-Wire Harness, 2 Spade Terminal Plug and 1 Ring Terminal

(1)

12 volts, Rotation: Reversible,
8 Foot Long 3-Wire Harness With Split Tab Male Blade Terminals
Application: OMC & Johnson Evinrude Applications

12 volts, Rotation: Reversible,
Includes 2 Wire Harness With 2 Blade Plug
Application: OMC Marine Applications

12 Volt
Reversible
Field Hsg OD: 91.8mm / 3.614in
Overall Length: 170.5mm / 6.713in

12 volts, Application: Volvo Penta Marine Applications

12 volts, Rotation: Reversible,
Includes 3 Wire Harness With 3 Ring Terminals
Application: 1979-1985 OMC Marine Stern Drive 2.5L & 3.0L Motors

TILT MOTOR EVINRUDE / JOHNSON 40, 48 ("J" SUFFIX) NOTE: 2-WIRE CONNECTION (FEMALE SPADE ENDS)

Tilt Motor

12 Volt, Reversible
Field Hsg OD: 78.1mm / 3.075in
Overall Length: 138.4mm / 5.449in
Shaft OD: 7.4mm / 0.291in

12 volts, Rotation: Reversible,
Notes: (2) 6.5mmID Mounting Holes (2) 3-1/2 Foot Long Wire Harness With Bullet

(1)

12 volts, Rotation: Reversible,
Includes Reservoir, 3-Wire Configuration
Application: Johnson, Evinrude, Chrysler & Force Marine Applications

12 volts, Rotation: Reversible,
Includes 6 Foot Long 3-Wire Harness With 3 Blade Plug and Reservoir
Application: OMC Marine Applications

12V,  Reversible

(1)

12 volts, Reversible,
Includes (3) 178mm Long Leads With Ring Terminals Late Style-Will Replace Early Style
Mercury Outboard & Mercruiser I/O Using Oildyne Pump