SP-1302-B ISO 130A 1INP 2BAT
MINIMUM PURCHASE QUANTITY:12
FOR SMALLER ORDER QUANTITIES SEE SP-SP1302
ISO 130A 1INP 2BAT
Volts: 6-50VDC Volts 130 Amps Input Terminals: 1 Terminals: 2 Mounting Length: 128.7mm / 5.067in Mounting Width: 108.2mm / 4.260in Mounting Height: 62.5mm / 2.461in Single Input, Dual Battery Isolator, Includes Mounting Hardware, Negative Ground Battery Isolator For OEM Delco (GM) Except CS Series Alternators, All Motorcraft (Ford), All Mopar (Chrysler), Japanese Imports Using External Voltage Regulators or External Sensing, Motorola Load Handler Series and 8EM Remote Sense Series Alts
SP-SP2702 PACKAGED ISO 70A 2INP 2BAT
PACKAGED ISO 70A 2INP
70 Amps
Input Terminals: 2
Output Terminals: 2
Length: 4.988in
Width: 4.161in
Height: 2.461in
Battery Isolator For Dual Charging System and (2) Batteries, Includes Terminal Hardware & Terminal Insulators, Overall Length 166.8
Motorcraft, Delco (Except CS Series), Mopar, Motorola, Prestolite, Balmar and Valeo Applications
1 Year Warranty
Maximum Alternator Rating | Recommended Wire Size / Circuit Breaker |
|
Up to 15ft | 15ft to 20 ft | 20ft to 25ft | 25ft to 30ft |
70 Amps | #8 ga. / 50 amp | #8 ga. / 50 amp | #6 ga. / 50 amp | #6 ga. / 50 amp |
95 Amps | #8 ga. / 50 amp | #6 ga. / 50 amp | #4 ga. / 50 amp | #4 ga. / 50 amp |
130 Amps | #6 ga. / 80 amp | #4 ga. / 80 amp | #2 ga. / 80 amp | #1 ga. / 80 amp |
160 Amps | #4 ga. / 120 amp | #2 ga. / 120 amp | #2 ga. / 120 amp | #0 ga. / 150 amp |
240 Amps | #000 ga. / 150 amp | #000 ga. / 150 amp | #0000 ga. / 150 amp | #0000 ga. / 150 amp |
SP-SP1302 PACKAGED ISO 130A 1INP 2BAT
PACKAGED ISO 130A 1INP 2BAT
FOR BULK PURCHASES SEE SP-1302-B
Volts: 6-50VDC Volts 130 Amps Input Terminals: 1 Terminals: 2 Mounting Length: 128.7mm / 5.067in Mounting Width: 108.2mm / 4.260in Mounting Height: 62.5mm / 2.461in Single Input, Dual Battery Isolator, Includes Mounting Hardware, Negative Ground Battery Isolator For OEM Delco (GM) Except CS Series Alternators, All Motorcraft (Ford), All Mopar (Chrysler), Japanese Imports Using External Voltage Regulators or External Sensing, Motorola Load Handler Series and 8EM Remote Sense Series Alts
SP-SP41102 PACKAGED CONVERTER 10A 12/14V VOLT CONDIT
PACKAGED CONVERTER 10A 12/14V VOLT CONDIT
The Sure Power Trail Charger allows the operator to charge a remote battery bank at a regulated 14V. This approach eliminates voltage loss due to long wire lengths. The Trail Charger is designed to provide a fully regulated 14VDC at a full 10 AMP or 20 AMP charging rate. The Trail Charger continuously charges the lift gate batteries at the voltage the need in order to take a charge, working to keep the batteries in a charge state ready for your next lift. The Trail Charger also eliminates or reduces the need for additional cables.
Download the Sure Power Flyer *PDF
SP-SP3003 PACKAGED ISO 300A 1INP 3BAT
PACKAGED ISO 300A 1INP 3BAT
Input Volts: 6-50VDC Volts Output Amps Peak: 300 Amps Number of Input Terminals: 1 Number of Output Terminals: 3 Includes Installation Kit?: No Mounting Length: 237mm / 9.331in Mounting Width: 194mm / 7.638in Mounting Height: 178mm / 7.008in (1) 1/2-13 Threaded Input Terminal & (3) 1/2-13 Threaded Battery Terminals, Overall Length 317.5mm
