 |
12 volts, Number of Terminals: 4, Continuous Duty, Diagram Number: 2-35B, New,
Notes: (2) 5/16"-24 Threaded Studs for Battery & Motor, (2) 10-32 Threaded Terminals for Activation & Ground, 8mm x 15.1mm Mounting Slots-56mm Apart on Center, 110 Amp Carry Current Rating, Mechanically Holds Circuit Closed or Open after Momentary Activation,
Application: Latching Solenoid is Used as Remote Power Relay or Master Disconnect
| Specifications |
| Special Applications |
Remotely-operated battery isolator, remote battery disconnect switch |
| Insulated/Grounded |
Insulated |
| NO/NC |
Normally open or normally closed |
| Min Qty |
No |
| Circuitry |
SPST |
| Contacts |
copper |
| Housing |
plated steel |
| Voltage Rating |
12V |
| Terminals |
copper; 10-32 thread and 5/16"-24 thread. Hex nuts and lock washers included |
| Continuous Rating |
110A |
| Maximum Current, Make |
- |
| Maximum Current, Break |
110A |
| Intermittent Time |
Not applicable: continuous |
| Bracket |
Straight |
| Bracket Mounting |
Holes 5/16" x 19/32", 2-13/64" on center |
| Breather Hole |
no |
| UL Marine & CE ISO 8846 Marine |
Not listed |
| Other Information |
Coil circuit energized by momentary switch |
|
|
|
Replacement solenoid 
